Repair My Windows And Doors

About Us

The 10 Scariest Things About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not corrosion or rot.

It is important to clean and oil UPVC doors and windows regularly. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. It is essential to make sure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they will usually fit into the old frames very easily. However If you have double-pane windows that are held in place by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this case you’ll need to source some plastic spacers that assist the new pane to fit correctly into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass to ensure that any fragments of glass fall on the fabric instead of onto the floor where they can be trampled upon and cause further damage.

Once the glass has been removed and the glass is removed, it’s a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and repair the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap is large, you may want to consider using a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can be affected by a variety of issues that include sliding. A sagging uPVC window can cause issues with light, draughts and even security. It’s important to take action when you realize that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you’ll need open the window so that you can get to the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you’re satisfied with the fit of your window, you can tighten screws to keep them in the right position.

If you are unable to reposition the hinges you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to loosen. It is important to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is typically caused by screws that have loosened over time, but it can be due to the mechanism of the handle wears out. It’s a good thing that it’s simple to fix the handle of a window that is loose yourself. First, you’ll need to close the window and then perform a test fitting. The corners of the sash need to be aligned with the casing joint. If it doesn’t, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

It is crucial to take action if wake up every morning to discover mouldy walls and floors that are wet. Water leaks from windows not only lead to the degradation of your home’s structure but also hinder your efforts to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue the caulking that was used up might need to be removed before a new layer is applied. When it comes to uPVC repair, it is important to avoid over-caulking. This will only make your window harder to clean and decrease its energy efficiency.

Check that any drainage holes have no debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread across the home.

If the leakage occurs between the double-glazed window, it is more likely the issue is with the seal than the frame. This can be easily corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens in the breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. It is essentially a very simple procedure, but it is easier to do when you have a person to help hold the frame up.

Verify that the uPVC hinges open and close in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue can be caused by opening the window incorrectly or due to a poor installation in the factory. Sending us a photo through our website can often solve the issue. We are always happy to give advice.

It is also essential to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few different factors. The hinges, also due to wear and tear can become misaligned, this will cause a gap to form where the sash joins the frame. They can be repaired by giving them good cleaning, but when they’re beyond repair, it might be necessary to get them re-aligned or replaced. In addition, the interlock could also become unbalanced. This is located on the hinge’s side and might require to be cleaned. In certain instances it might be necessary to replace them.

The second most frequent reason for draughts are the window seals. They can become worn down or damaged over time and will allow air to escape through the gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and will lessen draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. These will keep your home warm by blocking cold air.

Your upvc windows can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and there may come a point where it is more cost-effective to replace them rather than fix them. If you are experiencing issues with your window made of upvc it is recommended to speak with an expert as soon as possible.